Introduction to the system of the automatic packaging machine and explanation of the mechanical part

The packaging machine is a machine commonly used in production and life, especially with the development of the commodity market. The application scope of the packaging machine has been continuously expanded, and the market demand has gradually increased. However, many customers do not have a profound understanding of the automatic packaging machine they have purchased. Understand that simple failures encountered in peacetime production cannot be solved by themselves. Below, Dongtai provided a simple explanation of the key parts of the automatic liquid packaging machine, so that everyone could deepen their understanding of the liquid packaging machine. Online QQ

★ Main drive system: The main drive system of automatic packaging machine adopts x120WD0.37-2-1/43 planetary cycloid reducer to drive the sprocket to rotate the main shaft, drive vertical seal cam, send belt bevel gear, push rod cam , horizontally seal the cam, fill the regulator and complete all the actions of the machine. High degree of automation, strong system stability.
★ Conveyor belt section: The packaging machine is equipped with a bevel gear transmission belt adjuster. When the mechanical operation is carried out, the clamp clamp is driven to move the accuracy of the clamp up and down to complete the required size of the belt.
★Vertical Sealing: Vertical sealing is related to the packaging effect of the product. In the lower part of the forming machine, the film cylinder formed by the former is sealed by a vertical heating block. The reset action is performed by the vertical cam on the spindle. Strong coherence.
★ Ink printing is one of the features of this machine. One important functional device distinguished from other models, this device adopts the direct thermal type and mechanical clutch method to complete the ink printing, which has the advantages of clear writing, convenient word replacement, and reliable use.
★ Filling part: When the product is filled, the filling liquid is injected into the film cylinder by the metering pump through the injection pipe, and the quantity of the filling volume is adjusted by the quantitative regulator to be simple and accurate.
★ Horizontal sealing part: This part is located under the clamp. After forming, vertical sealing and filling, the film bag is bonded and cut by the horizontal sealing heating block to complete the entire bag making process. This process has higher requirements on the temperature, and the temperature directly affects the packaging effect of the product.
★ Automatic stop part: This is one of the automation highlights of the machine. When the machine is working, if the machine runs out of film, the machine can stop intelligently, save resources, and stop the connection part being pressed by the connecting rod on the belt shaft film. Automatic liquid packaging machines have a high safety factor.

This article was written by Wuhan Dongtai Packaging Machine. Please indicate the source: http://