How to use tape retention tester

Proficiency in the operation of the equipment is a must for each operator. Whether it is a machine failure or an inaccurate test value, it can be caused by improper operation. When the machine fails, the operator is the first to discover ,Does not affect the subsequent use, therefore, the correct operation of the device is particularly important, the following for everyone to introduce the following thermostatic tape holding force testing machine operation method:

1. Cut 1 inch wide strip of tape on the specified stainless steel plate;

2. Using a standard 2 kg rolling roller, roll back and forth three times at a speed of about 300 mm per minute so that the tape is uniformly distributed on the steel plate;

3. Hang the steel plate on the hook of the test box, and zero the timers and add the calibrated weight;

4. When the tape is dropped from the plate, the timer will automatically pre-store the test time;

5. The recorded test time will be used to determine the durability of tape adhesion.

Note: When hanging weights, you must confirm whether the timer is cleared!

6, according to the nameplate provides power plug AC220V 50/60HZ 10A;

7. Turn on the power switch.

8, thermostat set at 70. C, or other specified temperature.

9, all open the top two vents, in order to facilitate the smooth discharge of heat generated.

10, in addition to the temperature controller temperature settings, the other features have been locked before shipment to prohibit changes.

Each member of Haida adheres to his position, and his attitude of “Quality comes from precision, quality creates the future”; every piece of work that seriously confesses the client is done well. More information about the thermostatic tape holding force testing machine, please contact us.