1, see the instructions
After purchasing the luminaire, do not be busy to install it. You should carefully look at the markings of the luminaire and read the installation instructions. Then install and use the luminaire according to the instructions. Otherwise, danger may occur.
2, problems occur in time to replace
The light source parameters provided by the mark replace the aging lamp in time, and find that the two ends of the lamp are red, the lamp is black or there is a black shadow, and the lamp is not bright, the lamp should be replaced in time to prevent the ballast from burning out. Unsafe.
3. Do not change the structure of the luminaire
When cleaning and maintenance, care should be taken not to change the structure of the luminaire, and do not replace the parts of the luminaire casually. After the cleaning and maintenance is finished, the luminaire should be installed as it is, and the parts of the luminaire should not be missed or misplaced.
4, do not switch frequently
When using the luminaire, try not to switch frequently, because the current through the filament is higher than the current during normal operation, so that the filament temperature rises sharply and accelerates sublimation, which will greatly reduce its service life, so it should be minimized. The switch of the luminaire.
5, correct maintenance
The luminaires must be intensified during use to extend their service life. The lamp of the room should always be wiped with a dry cloth, and pay attention to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; the lamp installed in the toilet and bathroom must be equipped with a moisture-proof lampshade, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to anti-smoke, because the accumulation of grease stains affects the brightness of the lamp; the light-colored lampshade has good transparency, but it is easy to be dusted, so it should be diligently wiped to avoid affecting the penetration of light; If it is non-metallic, wipe it with a damp cloth to avoid dust accumulation and affect the lighting effect.
If the moisture is easy to cause the lamp to rust and paint, it will shorten the service life of the lamp. Therefore, moisture protection is the key to lighting maintenance, especially the bathroom, bathroom lamps and kitchen stove lights, should be installed with moisture-proof lampshade to prevent moisture intrusion, to avoid rust damage or leakage short circuit.
It is best not to wash the lamps in the home with water. Just wipe them with a dry cloth and wipe them with water. If you accidentally touch the water, wipe them off as much as possible. Do not wipe them with a damp cloth immediately after turning on the lights.
This is a model of ergonomic 3-legged Electric Height Adjustable Desk.
The height adjustment of the three legs sit stand desk is driven by power via three motors, making the desk move up or down in a fast and easy way.
With three legs, the sit-standing desk is able to fit with L-shape desk tops in different sizes.The features of CONTUO height adjustable desks include stable and sturdy structure, smooth operation, easy assembly, long life and low noise, among others.
So, if our customers require any special adjustable height desk, please first check the CONTUO here, we believe that you can get what you need.What we want to do is to provide our customers with the best services and qualified adjustable height desk to save their time and money and get what they need.
CONTUO products are the core competitiveness of CONTUO.We will continue to work with the world, the time, the market and all the respected customers.Continuous learning, continuous progress, continuous improvement!
Three Legs Standing Desk,Adjustable Study Table,Motorized Standing Desk,Height Adjustable Office Desk
Shaoxing contuo Transmission Technology Co.,Ltd , https://www.ctelectricdesk.com