[ Chinese wardrobe network ] Before the owner decides to make a walk-in closet, the owner should analyze whether its external environment is suitable for a walk-in dressing room, such as whether there is a road in the room, whether the balcony is double-glazed, balcony and Is there a problem with the door between the rooms? If all of the above are ok, then the cloakroom can be designed. So how do you design a walk-in closet? Next, let's take a look at the walk-in cloakroom design method.
1: The problem of the size of the space
There are usually two types of cloakrooms: one is divided by the building itself, and the other is divided by the re-segmentation space by itself or the designer. In fact, the latter does not need to be large in space, and it is sufficient. Some clothes that are usually not worn very much, it is best not to take up space, please arrange them all after finishing, this is the optimal embodiment of the activity space.
2: should start from ergonomics
If there is no problem in the first two steps, then your home can design the cloakroom, but the design of the walk-in cloakroom is about the rationalization and humanization of the collection function. It should be combined with ergonomics so that the cloakroom design can be done. .
3: Created according to lifestyle and hobbies
The homeowner should make the overall design according to the overall lighting, color and material before the decoration of the house. After the plan is determined, it should be done together with the home decoration. This can avoid the edge of the carpet, but the edge has been paved. Problems such as horns.
4: Avoid messy clothes
Because the wall cabinets in the walk-in closet are mostly open, all the clothes are exposed, so it is easy to be messy and messy. Therefore, the slab division should be reasonable, and the size of the objects to be placed, including the length, body, and weight, can be fully analyzed before the slab division, which are commonly used and which are reserved, who is suitable for the above, who It is suitable for placing underneath, placing it for convenience, and the like, and then, based on these analyses, creating a shelf segmentation map.
5: Choose excellent hardware
Hardware is an important part of quality assurance. If it is only cheap, it will cause trouble for future maintenance. In addition, a seat or telescopic pull rod is designed in the cloakroom. When the clothes are replaced, it can be hung. It is humanized design. Performance.
6: Install the cabinet to keep the size
The size of the cabinet is best to leave at least 5 cm of allowance for the surrounding wall, which is convenient for field installation. The so-called strict seam is actually a misunderstanding.
7: Lamp selection considers safety
Light is a problem that needs to be considered in any wardrobe. Therefore, the lighting should not only ensure the illumination, but also pay attention to its heat. It is best to choose the built-in bulb, and the lamp with the lamp cover is more suitable to avoid potential safety hazard. The location should also be considered.
8: Do a good job of moisture protection
Most architectural design concepts place the cloakroom close to the kitchen and bathroom. At least one wall is like this. If the wardrobe of the homeowner belongs to this type, the problem of moisture protection is particularly important. First, waterproof the bathroom or kitchen nearby, and then place some moisture-proofing agent during use.
Sweet Orange Oil,Avocado Oil,Rose Hip Oil,Berries Essential Oil
Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.jazxnaturaloils.com