Totalrespect fountain solution additive

British HDP based on the "high-speed, high-quality" characteristics of the printing industry, developed an easy-to-use fountain solution additive for the recurring problems in the printing wetting process - Totalrespect

The most important feature of Totalrespect is that it can be used with various hardness waters. The active ingredients do not react with calcium and other substances in the water and form impurities, which can effectively control the effect of calcium in the water on printing plates and blankets.

In addition, Totalrespect has excellent compatibility with various ink papers and wetting systems. Totalrespect can effectively remove any deposits or deposits of paper impurities on the plates and blankets. The cleanliness of the plate and blanket surface, avoiding deposits of calcium and deposition of paper impurities resulting in the appearance of stains on printed proofs

In addition, Totalrespect has the characteristics of thin water film stability and good anti-emulsification properties. These characteristics make it possible to maintain the ink-water balance and maintain printing stability in high-speed printing operations.

Compared to other ordinary fountain solution additives, Totalrespect reduced the amount of isopropyl alcohol used by 50%. For users, this is conducive to creating a healthy working environment, but also can save the cost of fountain solution additive, avoiding The instability of the dampening fluid caused by the volatilization of isopropanol and the cumbersome monitoring of the dampening fluid have resulted in savings in labor costs.

Totalrespect contains anti-foam and anti-bacterial ingredients, so when it is diluted into a fountain solution, various problems caused by foam can be eliminated.
To avoid the generation of microorganisms in the water tanks and the advanced water bucket cleaning devices of modern printing presses, the fountain solution will not form an impurity layer in the water bucket or on the walls of the water tanks. This protects the employees' health, environmental protection and operational stability. Have positive significance

Totalrespect recommends a dilution of 2.5%. The company can adjust the amount of alcohol between 2% and 4% according to its specific situation. The recommended amount of alcohol is between 6% and 8%. If the alcohol content exceeds 12%, it is very useful during the printing process. Emulsification failure may occur, and if less than 4%, ink spreading will occur

Source: China Printing Materials Business