Bruckner's BOPET Film Extrusion Line
As one of the leaders in the stretch film field, Brückner introduced the latest 5-layer high-viscosity PP film extrusion technology. Markus Gschwandtner, Technical Manager, explained that the special feature of this process is that the equipment can be used to produce super-stick metallized polyester films without the need for additional surface preparation. At the same time, the company also demonstrated a seven-layer PP barrier film production facility that uses a central EVOH to reduce the production process required for PVDC-coated films (usually one or more off-line auxiliary processes are required for PVDC-coated films).
In technology research and development, Markus Gschwandtner also revealed that the company has developed an engineering program to improve the quality of the film and extend the normal operating time of the production line. To improve the quality of the output film, they developed "Direct Drive" and "Pull Control Systems," which were numerically controlled and wound up to protect the film surface from damage when it was running a machine orientation (MDO) program. As the equipment shutdown due to the difference in pulling force can be effectively reduced, the uptime of the equipment can also be extended. The company also developed a "production management system" (MMS) to control "direct drive" to manage and optimize production, enhance the effectiveness of slitting processes, reduce waste, and increase film transparency.
In market applications, Karlheinz Weinmann, marketing communications manager, believes that in addition to the general packaged film and co-extruded packaging film, the market demand for the following applications is increasing: ultra-thin laminated film (18μm and below); multilayer structure film (For example, 5 layers) to supply labels and paper film application market; PP/PS/PET shrink film to supply shrink labels or other shrinkage applications; Professional BOPET film to make hybrid motors in capacitor supply cars; or thick film (200μm ) To supply LCD LCD market. She added: "At the Chinaplas, we signed the largest order of the company with Jiangsu Shuangliang Company, which is to provide four BOPP production lines for Jiangsu Shuangliang."
A floating shelf is a form of shelf with its wall fixings hidden within the shelf board, with no visible supporting brackets. It can be supported on hidden rods or bars that have been attached to studs. A thick floating shelf may be made of a hollow-core shelf glued to a cleat.
A floating shelf may have two or more channels open from the back towards, but without reaching, the front, into which slide fasteners attached to the wall, typically held in place by screws inserted through the bottom of the shelf.
For typical floating shelf supports, a supplier suggests that floating brackets with a diameter of 12mm can support a shelf at least 22mm thick loaded with 20kg, and 18mm brackets can support 30kg on a 28mm shelf.
This description is in reference to one particular type of floating shelf support, others options are available. Also not to be confused with corner shelves, which would require entirely different supports to make them "float".
Floating shelves are a good fit for a contemporary minimalist style interior.They can be used to expand storage space, atop a radiator to double as storage, or inside a hallway to double as a console table.
Wall Mounting Shelf,Wall Mount Corner Shelf,Wall Mounted Floating Shelf,Wall Mounted Shelf,Wall Mount Shelves Set,Floating Corner Shelves,Rustic Decorative Shelves,Wall Corner Shelves
Jinan Tri-Tiger Technology Development Co., Ltd , https://www.tigerwoodproduct.com