Discussion on the Making Process of High Quality Carton Die-cutting Plate

(III) Selection method of indentation mold

â– Selection of indentation model number in die-cut jams Slot depth of indentation die = jam thickness

Indentation die groove width = paper thickness x 7.5 + indentation line thickness

Indentation line height = die cutter height - (paper thickness + 0.05mm ~ O.1mm)

â–  Die-cutting corrugated paper model selection

â–  Indentation mold groove depth = thickness of corrugated wire compaction

â–  Indentation die groove width = corrugated paper thickness x2.0 + indentation line thickness

â–  Height of indentation line = height of die cutter - How to use thickness indentation die after corrugated paper compaction:

After the specification and model of the indentation mold is selected, the specific operation method of the indentation mold is described below, namely, how to use the indentation mold to form the indentation bottom mold on the bottom mold steel plate.

â–  Before installing the indentation mold, first adjust the die-cutting pressure of the die-cutting machine, and at the same time, remove the bottom-die steel plate of the die-cutting machine.

â–  Measure the length of the desired indentation mold on the stencil.

â–  The indentation mold is used to cut open the indentation mold, and a sharp 90-degree angle is naturally cut at both ends of the indentation mold.

â–  Use the positioning plastic strip on the upper part of the indentation mold to clamp the indentation mold on the corresponding indentation line on the die plate.

â–  Separate the bottom of the indentation mold from the adhesive post.

â–  The die-cut version is mounted on the die-cutting machine, and then the die-cutting machine is started once. The indentation die is positioned on the bottom die steel plate.

â–  Tear off the positioning plastic strip that adheres to the indentation mold on the bottom mold plate. The positioning of the indentation bottom mold is completed.

â–  The bottom of the indentation mold is made of high-strength primer, and it is recommended to use a rubber hammer to hit the indentation mold so that the indentation mold and the bottom mold steel plate are affixed more firmly, thereby eliminating the need for secondary fixing of the indentation mold with a strong glue.

Eight, trial die cutting, signing, formal production

After the die-cutting indentation bottom template is completed, the die-cut can be debugged to perform trial die-cutting formal printing, and the die-cut indentation quality of the product is carefully inspected. After passing the inspection, the die-cut die-cut sample is submitted to the customer for die-cutting sample. Signing can only be carried out in formal die-cutting indentation production.

The above describes the process, methods, and equipment of conventional flat die cutting plates from various angles. With the continuous development of China's printing and packaging industry, the continuous improvement of the level of flat pressure die cutting, will be proposed for flat die cutting plate making technology. More all-encompassing requirements, China's flat-die die-cutting plate technology will continue to develop simultaneously.

(Text / Anderson)