Fan coil cleaning solution
Cleaning procedure:
1. Confirm that the air-conditioning equipment is in a shutdown state, and cut off the power supply dedicated to the air-conditioning equipment.
2. Cover the working range of the protection center.
3. The equipment is in place.
4. Remove and clean the air diffuser.
5. Remove and clean the return air shutter.
6. Remove and clean the air filter.
7. Remove the fan vortex hood halfway.
8. Spray the surface of the fins with a multi-functional gas gun and a cleaning agent (the proportion is based on the proportion of stolen goods)
9. After one minute, use a multi-function gas gun to hit clean water for cleaning. 10% compressed air, 90% clean water.
10. Clean the water tray and eject the drain.
11. Restore air-conditioning equipment.
12. Inventory and move the device.
13. Cancel the protection.
14. Turn on the power supply exclusively for the air conditioning equipment and turn on the air conditioning equipment.
Safety Precautions:
1. Pay attention to the safety of items in the workshop.
2. Pay attention to the safety of engineering personnel.
3. Pay attention to electricity safety.
4. Pay attention to the safe use of cleaning agents.
5. Pay attention to equipment safety.
6. Pay attention to restore the tightness of the installation.
Cleaning agents and working equipment fully comply with the corresponding national standards.
Others: If there are special pollution and results, this plan may be changed.
small side table,end table,modern side table,minimalist side table
Foshan Poesy Furniture Co., LTD. , https://www.poesyfurniture.com