After the wood is bought, an important part of the production of the mahogany furniture factory is the use of materials, including cutting, batching, feeding, etc., which are completed before the furniture design drawings are completed and the furniture is opened, assembled and polished. Experienced factories will pay special attention to the use and matching of materials, and form a set of "specifications" in the operation to make full use of wood. On the contrary, factories that use wood and are unplanned often leave a lot of short materials and consume more wood.
In the mahogany furniture factory, every saw saw can be tens of thousands of costs. The experienced cutting master is not only a long-term leader, but also able to make full use of every piece of wood under the premise of reducing material errors.
Some excellent cutting masters know almost every piece of wood, know where to cut, how to choose materials, and also in-depth study of the design, structure and craft of each piece of furniture. In the mind, they have a familiar "framework" that knows what to do first and what to do later, what problems they may encounter, and how to solve them. In order to reduce the mistakes of materials, the master responsible for cutting materials should clearly understand the characteristics of the materials used in the furniture in advance, including the style, structure and styling requirements for the wood, and then go to the purpose of sawing and selecting materials.
Timber is sorted and sorted
Usually, the material is bought back from the wood and started when the factory unloads the truck. The first step is to classify the wood. When classifying, of course, according to the type of wood, new materials and old materials, but also refer to the length, diameter, size and pros and cons of the wood. The advantage is that it is quick and easy to find the wood of the required size when selecting materials, without the hassle. Secondly, the dimensions of the material, such as thickness, length, width and width, are determined according to the furniture design drawings, so it is necessary to study the drawings as early as possible. In addition to mastering the operation technology of the machine, the material-cutting master must adhere to two basic principles, that is, "long material can not be sawed short, wide material can not be narrowed." That is to say, under special circumstances, the material is only sawed from the thickness of the wood. In some demanding factories, long saws are used shortly, and wide saws are used narrowly, which is a very serious mistake.
When the long saw is short, special consideration should be given to how to use the remaining material.
There is also a noteworthy aspect of the material opening, that is, after a piece of wood is sawn into a sheet, it is necessary to return to the original layer of wood to be stacked and packed, and the order cannot be disordered. Especially when the top box door panel and the desk chair panel are used for materials, the single board or the same wood board is required to have the same color and pattern, and the boards after the opening must be stacked as they are. Again, there must be an order and a primary and secondary selection. Before the board is used for drawing, sawing and planing, it should be in accordance with the furniture design drawings, from good material to secondary material, from long material to short material, from wide material to narrow material. After ensuring the required material, length and width of the furniture, finally match the short material, narrow material and secondary material. For example, a red rosewood throne sofa, relying on the head, the backboard, the face board, the armrest board, must be considered when selecting materials, and then consider the legs, waist, all kinds of short squats.
As the saying goes, "short blacksmith, long carpenter." After the materials are prepared, the lines, sawing and planing should be kept as much as possible. It is rather long, not short, and make full use of the plates. If you have to cut or narrow, you should consider how the rest of the part is used and where it is used. For example, how to cut the length of about 30 cm, or how to use about 2 cm in width, etc., only comprehensive consideration, these scraps can not be wasted.
In this way, for a piece of furniture, not all parts and materials are ready for processing, but after the main part of the material is prepared, the rest will be added. The selection of materials has achieved the distinction between the primary and secondary, and has been ordered in an orderly manner. Once there is a mistake in the production of furniture, or the small material is not enough, and then look for and replenish from the pile of wood, the workload is not very large. In short, in the use of materials, from the classification of wood, to the cutting, material selection, feeding, there is a "normative" operation, not only reduces the mistakes, rework, cost of materials, the key is to make good furniture.
For more information, please pay attention to the official website of Xianghe Furniture City http://
Colanders And Strainers,Pot Strainer,Vegetable Steamer Basket,Vegetable Steamer Pots
Xiongyang Household Co., Ltd , https://www.jmyjkitchen-manage.com