[ Chinese wardrobe net ] introduction of the types and accessories of the whole wardrobe
First, the plate
The board is the main component of the overall wardrobe , and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. Wood-based panels are further divided into splints, particle boards (particle board), and fiberboard. Among them, fiberboard has high density, medium density and low density.
1, particle board (particle board): middle long wood fiber + fine wood fiber on both sides, pressed into a board. Particleboard: Take the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, formed by high temperature and high pressure. The advantage is that the expansion rate is small and the stability is strong. The disadvantage is that the nail holding power is small, the visual roughness is rough, and the glue amount is large. Only high-quality imported particleboard meets the highest European E1 standard, and the formaldehyde content is less than 0.9mg/100m.
2, MDF (fiberboard): powdered wood fiber is pressed at high temperature, the surface is flat, and it has the advantages of anti-deformation, good stability, high bearing capacity and strong nail holding power. The strength and hardness are better than the particle board, and the cost is higher.
Second, the material of the border
At present, the frame materials of all the wardrobes on the market mainly include aluminum alloy, aluminum-titanium alloy, magnesium-titanium alloy and high-quality color steel. In general, magnesium-titanium alloy and aluminum-titanium alloy have high strength, durability and firm quality to ensure the door. Up to 2.8 meters without deformation, smooth sliding. The carbon steel frame is light in weight and the appearance is painted, and the paint will be stripped or oxidized and rusted for a long time. The pulley of the closet is divided into the upper wheel and the lower wheel. The upper wheel is the guard wheel, which is used to make the door slide smoothly when pushed in parallel. The lower wheel is divided into hidden wheels, which are made of pure nylon to carry the weight. The semi-circular progressive rolling is the center of gravity through the wheels, so the horizontal line is pushed and pulled. The bearing capacity can reach 200 kg, the wear resistance is high, and the push-pull life can reach more than 300,000 times.
At present, some brands use a set of upper wheels (hanging rails), so that the lower wheel must bear the weight and play a guiding role. The pressure is too large, it will be easily deformed after two or three months, and the service life is not high. In the case of Elyland, the upper and lower sets of wheels are used, the upper rail is guided, and the lower rail is loaded, so that the pulley can be better protected, so that the maximum load of the pulley can reach 200 kg, and the service life can be as long as 300,000 times or more.
Third, the main accessories of the wardrobe
There are rotating clothes hanging, push-pull mirrors, lattice racks, pants racks, tie grids, etc. The wardrobe accessories can not only reflect the design inspiration of the wardrobe, but also meet the needs of customers. It is the soul of the whole wardrobe.
1. Trousers rack: The stacked pants will have creases, while the trousers racks will not leave creases in the trousers. It requires no less than 600mm of hanging space, so the trousers rack will usually be placed under the drawer, so Can save space.
2, pull plate: stacked woolen clothing code put together to find it will be very troublesome, if you use the pull plate can make the stacked clothes well, but it also has the disadvantage of less storage space, so customers should choose carefully .
3, each successful man will have a number of ties, these words are lined up in a non-tie box. This tie box takes up less space than a drawer, so you can arrange the position of the tie box at will by seeing the pins. Your socks, shorts, scarves and other small items have a home.
4, push-pull mirror: the wardrobe must have a face dressing mirror, the overall wardrobe design of the dressing mirror hidden in the closet, a light pull can appear, push back the dressing mirror tightly next to the cabinet board, no occupation of the wardrobe Inside space, a small mirror makes you radiant.
Fourth, how to identify the material
1. Plate material: The surface of the plate is made of melamine finish, no need for paint, fine surface, smooth structure, hard texture, anti-mite flame retardant, known as “non-defective plate†in foreign countries. The middle part of the substrate is medium density board, the density can not be lower than 0.80g/cm3, otherwise the bearing capacity and flatness will be affected; the water content can not be lower than 6.5%, but it should not be too high, otherwise it cannot adjust itself according to the change of climate; Surface technology, by hand touch to distinguish whether it is embossed surface or flat, the relief surface is the best; formaldehyde emission 1.1mg / L, to achieve European E1 standard, and test reports, alert to particle board, dyed moisture-proof board. In addition, good plates have anti-ant, anti-mildew and other functions.
2. Anti-counterfeiting of the board: There are brand logos on both sides of the embossed board and the edge-sealing position.
3. Smell the smell, soak the water test (too fast and not to be lifted).
4. Edge sealing: Whether it is smooth, delicate, and strong adhesion (pseudo-deterioration process carefully cracking).
5. The table should be like one: look at the material in the side plate hole. Of course, be careful of the material inside the cabinet side panel and the solid board and the laminate (four sides) without punching.
6. Standard specification plate: There are standards, processes and precision to ensure.
7. Aluminum alloy sliding door frame material: see the cross section is bright and smooth without burr, the minimum wall thickness is required to reach 1.1mm;
8. Whether the key hardware accessories are branded with their own brand anti-counterfeiting labels, and the weight (such as drawer guides).
9. Push and pull the sound to judge the quality of the pulley, but not to say that the sound is as small as possible (may be engineering plastic or nylon); whether the upper rail guide wheel has an adjustment function.
10. In short, carefully understand the sample to prevent consumption traps.
Desk Riser
Manual, gas lifting and electric desk riser. Customize colors and size desk adjuster can transform any desk into a comfortable workstation that suitable for your needs at any time. It gets you out of your chair to relieve muscle tension, improve blood circulation, reduce stress, and increase productivity and that's the best sit and standing workstation and a minimalist and an affordable & feasible solution for sitting or standing at work.
Different models of stand up Desk Converter and monitor riser:
Spacious two-tier desktop: Add up to 2 monitors on the roomy top tier plus a keyboard and mouse or laptop on the lower tier. The ergonomic two-tier design provide you perfectly for ideal studying and working space.
Convenient gas spring lift and single-handle design let you smoothly switch from sitting to standing. Freely height adjustment -- Once you find your ideal height, our smart height locking mechanism locks the desk in place.
These series of desk riser have a sturdy and stable steel frame. Our durable and heavy-duty steel frame provides maximum stability at every level. No matter sitting or standing, you can safely work with confidence.
We have many series of computer standing desks to help point you in the right work direction. Whether you want something that`s high-end and elegant, affordable, high quality or a Gaming Desk, laptop desks, there`s something on our products list to suit your comfort and wellness needs. We offer the best compuer desk, movable laptop table, office chairs, Laptop Desk, Sit Stand Desk, office exercise bike and an under-desk treadmill to make your work experience healthier.
Ergonimic desk riser, Standing desk converter wood, Adjustable desk desk converter, Computer desk riser, Desk adjuster
Foshan Hollin Furniture Co.,Ltd , https://www.hollinfoshan.com