In modern society, people's lives are getting better and better. Therefore, it is very easy to buy an alternating salt spray test chamber, but it does not mean that the equipment will be maintained. Therefore, the long time of using the equipment is the operation. One of the difficulties. Then this article is an analysis of the maintenance of this test box, so that you can save money and save worry.
1. It is necessary to regularly lubricate the air compressor.
2. The oil water separator switch should be turned on after each test, and then the oily water will be discharged.
3. If the test is not done for a long time, the saturator should be turned on, and then the water inside should be discharged; in normal use, the water in the saturator should be replaced regularly.
4. The air conditioning valve function should be checked regularly.
5. In the case of long-term unused use, if you want to restart the test, you should first check all electrical systems.
6. Keep the inside of the box clean after the test, and try to keep the test box in a dry environment.
7. If the electrical components on the control panel need to be replaced, it should be carried out under the guidance of the manufacturer to avoid unnecessary trouble.
8. If the test period is more than 1 month, replace the water in the heating tank.
9. If the salt solution used for testing is used more than one week later, do not use it again to avoid affecting the test.
10. If the time from the next test is longer, the cabinet after the test is completed should be cleaned.
The above points are the trick to make the alternating salt spray test chamber longevity. Just click on the collection on the Internet!
The tripod Turnstile Gate is suitable for all kinds of places that require pedestrians to pass in an orderly manner after verification.
Advantage
1. Fully rainproof tripod barrier gate cabinet made of stainless steel. Compared with pedestrian access equipment such as wing gates and swing gates with general functions, the tripod baffle gate are more cost-effective and good-quality.
2. RFID tripod turnstile gate has a personalized installation interface (such as card reader, indicator light installation, etc.) to ensure that the control gate equipment of the system integrator is simple and convenient during installation.
3. The movement of the 3 arm tripod turnstile gate has an automatically adjusted hydraulic shock absorber. When the tripod turnstile is used, the sound is very small and there is no impact, and the brake lever automatically decelerates and returns to the center. The surface of the movement is electroplated with yellow dichromate.
4. Semi-automatic tripod turnstile gate can be programmed with gate control, one or two direction control (set by the user).
3 Arm Turnstile Gate,Tripod Barrier Gate,Tripod Baffle Gate,Rfid Tripod Turnstile Gate
Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.szzcsecurity.com