[Office Partner Information Center] Many people in the house decoration time in order to covet cheap, please some irregular "pheasant" electrician, so the home network cable is either a mess, or it is not responding, but still have to Reworked. Therefore, friends who are interested in connecting their own network cable sockets will still come to learn. How to connect the network cable socket?
[Network socket wiring diagram] How to connect the network socket to the broadband socket
The network cable socket we are talking about here, the correct name should be the network cable module, which is generally applied to the indoor wall as a network cable jack. At present, the family generally uses twisted pairs. The twisted pair is divided into T568A and T568B. The information module is connected to the standard T568A standard and T568B standard. Our network cable socket or cable crystal head are only You can choose a way to connect in A and B. If you make a mistake, you will not respond.
There is no essential difference between A and B, just the difference in color. The respective wiring methods are:
T568A connection: green white, green, orange white, blue, blue white, orange, brown white, brown;
T568B connection: orange white, orange, green white, blue, blue white, green, brown white, brown;
On the genuine network cable socket, in addition to the color code indicating the two connection modes of 568A standard and 568B standard, the eight wiring bayonet also indicates the corresponding serial number of each internal terminal and the front end pin, and various colors on the socket. The standards are very clear and well recognized. When wiring, you only need to match each color line pair in the twisted pair into the corresponding color coded bayonet.
Step 1: Connect the inner cable (or slot) of the wall with a special wire stripper or a wire stripper to the wire mesh at a distance of about 10 cm from the offline head (or a little longer to facilitate the back pressure line). Remove (do not hurt the metal line).
Step 2: Divide the line and use the wire cutter to press into the metal card slot of the network cable socket.
note:
a. Some network cables are four white and orange green blue and brown main color lines, instead of white and other color lines mixed with white lines and main color lines, so be careful that after each group of two lines is placed, Then remove the other lines, otherwise, you can't know which one is white orange, white blue, white green, white brown.
b. After each separation, do not press the line first, and wait for all the lines to be placed. Use the same wire cutter to make the line.
c. The wire cutter has internal and external points, and the outer side is long. After hitting it, the excess line on the outside will be cut off. Therefore, if the outside is placed on the inner side of the network cable socket, the network cable will be cut.
Step 3: After cutting out the extra lines, attach the lined information module to the 86 box panel. There is also a line card at the back of the good network cable socket, so that it can protect the slight dragging of the network cable from falling off. However, most of them do not have a line card to protect the network cable socket, so be careful when placing the network cable socket in the wall and on the socket panel. Do not pull the cable.
Is it very simple after the network cable socket is read? Do you have to do it yourself next time you need to connect the network cable socket? If you still feel troublesome, then you must ask for a regular home improvement company. In fact, the cost of asking a home improvement company and an unprofessional electrician is similar. The most important thing is to save a lot of trouble.
Fresnel Screen Ust,Fresnel Screen,Fixed Frame Projector Screen,Alr Projector Screen Ust
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing-projectorscreen.com