The bathroom is the most used place for daily use, so it is always extraordinarily thoughtful when it comes to renovations. However, after checking in, you will find many blind spots that have not been taken into consideration. For example, if the outlet is not enough, the shower is not high and so on. The full expectation now is only repentance and helplessness.
First, bathroom waterway design
The bathroom is the place with the most water, so before the renovation, the design of the waterway must be considered clearly and well planned. In order to avoid the occurrence of insufficient use after the arrival of the situation. Here I have listed a simple list for everyone. Everyone can refer to it. Of course, you can adjust it according to your actual situation.
List
1. Washing machine faucet (1)
2. Mop Pool Faucet (1): Although many families are not comfortable with the mop pool during the renovation, it is also advisable to install a faucet for cleaning rags and other things.
3. Water inlet and outlet of water heater (1 set)
5. Hot and cold water outlets for washstands (2)
6. Floor drain (2)
Second, the circuit can not be ignored
The circuit has always been the most important thing in the decoration. With the continuous increase of home appliances, the demand for the circuit is also increasing, and the bathroom is also the same. During the renovation, you can reserve a socket next to or behind the toilet. This is mainly due to the possibility that you may use the smart toilet at the same time. You can also install a socket beside the sink. It can be used as a hair dryer. Of course, the position is not absolute. Fixed, can be adjusted according to personal habits.
As for the best water heater switch can be made to control the switch panel, in order to reduce the extra loss caused by the plug; Finally, we recommend that you design the toilet's main light and exhaust fan switch outside the bathroom door. In addition to water and electricity, there are other things that need special attention. In this area, I also picked out some important ones for everyone.
Third, other matters needing attention
Sinks, toilet pipes to install angle valve (angle valve can effectively adjust the water pressure, and can play the role of switching, if the faucet leaks and other phenomena occur, you can turn off the triangle valve, do not have to close the home of the total valve), easy Check-in after check-in.
When installing the exhaust fan, it is necessary to observe whether the exhaust pipe and the seal are installed. This step is essential for the renovation of the bathroom to prevent the odor from scattering in the home. Many families found that after a period of stay, the water in the floor leaked poorly and was unable to drain effectively. This is because the flushing test was not performed after the floor drain was installed. The worker's master may accidentally throw cement in the drain during installation. After a long time, solidification occurs, causing plugging of the water. Therefore, after the installation of the floor drain, you must do a flush test immediately to avoid such situations.
<\p><\div>
Dresser Drawer Organizer,Silverware Drawer Organizer,Acrylic Drawer Organizer,Small Drawer Organizer
ROYALWIND IMPORT&EXPORT CO.,LTD , https://www.hoombest.com