Xiaobian teaches you the new maintenance of the wardrobe to answer the reasons for the deformation of the panel furniture

[ Chinese wardrobe network ] According to incomplete statistics, consumers are most dissatisfied with the cabinet class is the warping deformation of the cabinet door. It can be said that the wardrobe is also an important part of bedroom furniture, and it is one of the large pieces that make up the bedroom furniture. Therefore, the quality of the wardrobe directly affects the living room furniture. A senior board expert analyzed and said: "In fact, in addition to the material and design reasons, the influence of unfavorable factors in the processing process is the main cause of the bending deformation of the long door of the high cabinet."

In the maintenance of the wardrobe, you need to pay attention to the following aspects: Avoid using irritating and corrosive chemicals such as alcohol and detergent which are easy to damage wood. Wooden wardrobes can be wiped with a clean rag, but if it is dirty, use soap or a neutral detergent and wipe it with a damp cloth. Ultraviolet light is also destructive to wood furniture, so proper use of fabrics or curtains to avoid sun exposure is necessary. If you want to wax, it is best to choose a wax with a high concentration and solid, free of silicon, so as not to damage the paint surface.

Improper handling of the paint causes deformation of the panel furniture components. Component stacking causes deformation in production, some operators are convenient for drawing, stacking the plates freely, or stacking the plates is not flat, and even leaning the plate against the wall, causing the plates to enter Before the next process, it was deformed due to its own weight. The coating process causes deformation During the finishing process, due to improper use of the process and raw materials, the plate is deformed and deformed as the internal stress of the coating changes. The effect of finishing putty In the decoration of the door parts, many manufacturers use pig blood putty or glue to prepare the putty in order to reduce the cost. Because these two kinds of putty contain a lot of water, the substrate commonly used for plate furniture - medium density Fibreboard and particleboard are particularly hygroscopic, so when one side of the door panel is not putty, and the other side is coated with such a water-rich putty, the door panel part is hygroscopic and deformed.

The influence of the drying process In the production of many manufacturers, when the board is coated with putty or paint, it should be placed on the drying rack for natural drying. If the pole of the drying rack is too sparse or uneven, it will also cause the wardrobe door. The part was found to be bent and deformed during the drying of the paint. The influence of the internal stress of the coating will form a certain coating after curing. Even if there is no external force, an internal stress will be generated. If the internal stress is not handled properly, it will become the main cause of bending deformation of the door component. one.

Synthetic Fringes

Human hair bangs can well modify various face shapes. also you can cut the bangs to any length as you like to fit your face and your hairstyle.becoming cute and sexy attractive in one second when dating/party/wedding/daily use.
The bangs are made of high-quality virgin hair, hand-crocheted. you are free to perm and dye. human hair will show white smoke while burning and will turn to ash.
Clip in hair bangs with temple are made of human hair, sewn in good clips. the clips have a strong strip and seam is barely invisible, so other people cannot tell it is a bang on top of your own hair. also enough thickness to cover the forehead without worrying.
Frequent styling may cause dry end or split. use mild hair conditioner can prolong the usage of extensions.
Neat blonde bangs use 100% high quality synthetic fiber, no smell, very natural looking.suitable for many occasion blonde hair bangs for halloween, cosplay, custom, party
Take out the bang and open the 2 clips, put it aside. use a comb to part your hair down the center. place the bangs near the crown of your head.secure the 2 clips.cover the clips and the edge of bangs with your hair.then a beautiful bangs has been finished.

Synthetic Fringes,Clip In Hair Bangs,Fringe Hairpieces Hair Extensions,Clip On Bang Fringes

Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.alileaderbeauty.com