[ Chinese wardrobe net ] Maybe you are not sure what the key point is when you buy the wardrobe , then Xiaobian is here to tell you that the wardrobe door is an important factor to consider. The selection of the wardrobe is the most important thing. Let's take a look at it. Take a look at what you need to know.
Wardrobe door - choice of plate type
There are many kinds of good sheet base materials, but in returning to the most basic excellent materials, there are two types: MDF and particle board.
The MDF is made of wood fiber or other vegetable fiber as a raw material, and an artificial plate made of resin or other adhesive is applied. According to the density, it is divided into high density board, medium density board and low density board. The surface of the MDF is smooth and flat, the material is fine, the performance is stable, the edges are firm, and the surface is decorative. However, the density of the MDF is poor, and the nail holding power is worse than that of the particle board.
Particleboard is a kind of granules made of wood or other lignocellulosic materials, which are coated with an adhesive and glued under heat and pressure. The finished particleboard can be used directly, and the sound absorption and sound insulation properties are also very good. However, it also has its inherent disadvantages. Because the edges are rough and easy to absorb moisture, the edge-sealing process made of particleboard is particularly important. According to the raw materials used: wood particle board; bagasse particle board; bamboo particle board; cement particle board; gypsum particle board.
Another important recommendation is the solid wood particle board. It is a type of particle board made of wood or other lignocellulosic material, with fine wood fibers on both sides and long wood fibers in the middle. The adhesive is then applied and then gelled under heat and pressure. It is a plate produced by the particleboard process, but it is a new type of high-grade environmentally friendly substrate. It is widely used by furniture manufacturers in Europe and the United States. The domestic high-end panel furniture market has begun to adopt this type of plate in large areas.
Wardrobe door - door panel thickness
The thickness of the door panel of the whole wardrobe should preferably be 18 mm to 22 mm, which is more stable and durable. The thickness of the glass is generally 5 mm to 10 mm. Too thick and too thin will result in the use. Insecure.
Wardrobe door - material environmental performance
The environmental protection of the overall wardrobe is the key. Some wardrobes have been scented for two years, and the overall wardrobe door material is not selected. Therefore, it is best to choose the whole wardrobe cabinet door, such as Hao Laike, Kohler and other famous brands. These brands choose E1 grade (formaldehyde emission ≤1.5mg / L) and even release the environmentally friendly sheet, can be used with confidence.
Wardrobe door - the degree of solidity
The overall wardrobe door must be made of high hardness and strength to ensure that the use is not deformed. The industry generally uses carbon steel and aluminum as the overall wardrobe door material. You can feel the hardness of the door by tapping; feel the strength of the door by shaking.
These are the options for the wardrobe door. If you want to choose a wardrobe carefully, you really have to think about it.
The serious of ladder tape is used for airtain,we can product these about the width between10mm-40mm.
Ladder Tape
WUXI MIFUN INTERNATIONAL TRADE CO.,LTD , https://www.mifunblinds.com