[ Chinese wardrobe network ] Nowadays, the wardrobe brands are endless, and the materials used by different brands are also different. So how do you identify the quality of the wardrobe panels? Let's take a look at them.
Material: The surface of the board is made of melamine finish. It does not need paint. The surface is fine, the structure is flat, the texture is hard, and it is anti-mite and flame retardant. It is called “no defect sheet†in foreign countries. The middle part of the substrate is medium density board, the density can not be lower than 0.80g/cm3, otherwise the bearing capacity and flatness will be affected; the water content can not be lower than 6.5%, but it should not be too high, otherwise it cannot adjust itself according to the change of climate; Surface technology, by hand touch to distinguish whether it is embossed surface or flat, the relief surface is the best; formaldehyde emission 1.1mg / L, to achieve European E1 standard, and test reports, alert to particle board, dyed moisture-proof board. In addition, good plates have anti-ant, anti-mildew and other functions.
2. Anti-counterfeiting of the board: There are brand logos on both sides of the embossed board and the edge-sealing position.
3. Smell the smell, soak the water test (too fast and not to be lifted).
4. Edge sealing: Whether it is smooth, delicate, and strong adhesion (pseudo-deterioration process carefully cracking).
5. The table should be like one: look at the material in the side plate hole. Of course, be careful of the material inside the cabinet side panel and the solid board and the laminate (four sides) without punching.
6. Standard specification plate: There are standards, processes and precision to ensure.
7. Aluminum alloy sliding door frame material: see the cross section is bright and smooth without burr, the minimum wall thickness is required to reach 1.1mm;
8. Whether the key hardware accessories are branded with their own brand anti-counterfeiting labels, and the weight (such as drawer guides).
9. Push and pull the sound to judge the quality of the pulley, but not to say that the sound is as small as possible (may be engineering plastic or nylon); whether the upper rail guide wheel has an adjustment function.
10. In short, carefully understand the sample to prevent consumption traps.
There are 5 seaters, 6 seaters or 7 seaters of the PU Corner Sofa.The PU corner sofa is often composed of single seat, loveseat, corner seat, three seat, chaise lounge and ottoman, you can choose your own combination according to your room size which make the room more beautiful. The cover material is PU which is soft and with good toughness, and PU is easy to clean and anti water, PU is also eco-environmental.
PU Corner Sofa,PU Curved Sofa,PU C Shaped Sofa,PU L Shaped Sofa
Kaifeng Lanwei Smart Home Co., Ltd , https://www.leather-recliner.com