Adafruit was founded in 2005 by the Massachusetts Institute of Technology engineer, Limo Ladyada. Her goal is to create the best online learning electronics and make the best design products for manufacturers. Adafruit's Raspberry Pi series is the most innovative open source hardware supplier in its class, including Raspberry Pi expansion boards, Raspberry Pi accessories and Raspberry Pi derivatives.
Their latest product is a compact and wearable Raspberry Pi Zero camera with its easy-to-design 3D print housing.
Mainly as a wearable device around the user's neck, the camera can take 8 megapixel snapshots every few seconds, equipped with an expandable microSD slot (2.5GB), and can be fully charged in just two hours.
It is worth noting that polylactic acid (PLA) is recommended as a 3D printed material , but if ABS is your first choice, up to 2% of the zoom model may cope with any possible shrinkage. In the current state, 3D printed parts need to be pasted together to complete the project. In theory, some models can be modified to achieve snap fit and material deviations that will require further consideration.
Of course, just like many electronic projects, the printed part is often the easiest part of many tasks. Basic welding skills, familiarity with loading boot software to PI and assembly testing will need to be resolved to ensure that all parts are fully affixed together. Once the component's work is complete, all that is required is to embed all the components into the 3D print shell and then glue them together.
Finally, although this can't be compared to the state-of-the-art wearable cameras like GoPro. But this wearable camera has to be said to be the most cost-effective one. It costs no more than $100 to assemble all the printed parts. At the same time, this camera can be described as a “fool camera†because anyone can operate it without any technology. Once everything is placed together, you just need to turn on the camera and it will automatically start shooting 1280×720 in 2 seconds. JPEG photo.
These PET wire can be used for poultry (chicken, duck, goose) breeding bed support, grape and kiwi trellis support, and also can be used for interior decoration, hanging objects, etc. Widely used in agriculture accessories, greenhouse, farming, vineyard. In Greenhouse, it is used for the curtain or film pressing and supporting, it is the best substitute of iron wire and steel wire.If the customer needs, we can also mail the sample of goods free of charge.There are many advantages, such as: Long service life, high strength, anti-static, flame-retardant, not easy to break, smooth surface, anti-acid, anti-UV radiation, weather resistance, aging and so on.
Practicability: the plastic steel wire has complete specifications and various varieties, which can meet the actual needs of different users.Physical properties: plastic steel wire has high strength, low elongation, thermal stability and non conductivity.Environmental protection: the plastic steel wire has no corrosion and pollution and plays an environmental protection role.
Henan Fengcheng Plastic Co. , Ltd. specializes in producing and exporting many kinds of plastic product ,such as Agricultural pe tarpaulin,HDPE Leno Tarpaulin,orcahrd rain cover,Greenhouse Film,plastic film,Mulch Film,PE Panda Film, Pond Liner , Weed Mat and so on.
Plastic Wire,Pet Wire,Greenhouse Film Fasten Lines,alkali resistance
Henan Fengcheng Plastic Co.,ltd , https://www.fcsyplastic.com