Q: Does the hot weather in summer really increase formaldehyde release?
Shenzhou Home: The release of formaldehyde is a slow process. Hot weather or transpiration does accelerate the rate of formaldehyde release. However, the introduction of environmental protection standards for plates has taken into account the factors in this regard. Therefore, as long as the products meet the corresponding environmental standards, even in the summer, there is generally no situation in which indoor formaldehyde exceeds the standard due to increased formaldehyde emission. Of course, considering that many aspects of the decoration may involve formaldehyde, it is better to keep the ventilation of the newly renovated house.
Q: In addition to aldehyde products, is it useful or useless?
Shenzhou Home: At present, the products known as formaldehyde removal can be roughly divided into two types: one is chemical reaction method and the other is physical adsorption method. The chemical reaction method, its effectiveness, how long it will last, and whether it has secondary pollution, there is no relevant experimental data support. Up to now, this method can only remove formaldehyde on the surface of the board. Considering that the release of formaldehyde is a long-term process, its overall effect is very limited. The physical adsorption method is theoretically effective, but its adsorption range is limited, and according to the current detection method, it is difficult to judge whether the formaldehyde is decomposed or released again after being adsorbed. Therefore, for the time being, the choice of high environmental standards for household products, enhanced ventilation, and air purifiers are the best choices to prevent indoor formaldehyde from exceeding the standard.
Q: Is the sheet furniture really "short-lived" furniture?
Shenzhou Home: How long can the sheet furniture last? In fact, it has a lot to do with the environment in which it is applied. Long-term wet environment does affect the service life of sheet furniture. However, if the environment is better, the life of sheet furniture can be very long. The reason why people will not produce durable plates is mainly because the early plate processing technology is not mature, and the plate market is not good, and the quality of inferior plate manufacturers is not guaranteed. However, in recent years, the state has made efforts to eliminate backward production capacity, and the technical upgrading of the sheet metal industry has brought the quality and service life of the board to a new level. Therefore, unless it is for the purpose of collection, there is no need to worry about the service life of the panel furniture.
Door Hardware,Door Strike Plate,Glass Door Stopper,Door Hardware Plate
BNF HARDWARE CO., LTD , https://www.bnfhardware.cn