A wide range of shoes are required for outdoor activities. In addition to competitive footwear and technology (such as rock climbing shoes), the classification of shoes for mountain activities is as follows:
1ã€Hiking shoes Trailshoes
It is mainly designed for short-distance trekkers. It takes only one to two days outside the country and is suitable for general outdoor camping. The mountain is not very complicated. The design features of these shoes are relatively comfortable, soft, and good in air permeability, but the rigidity of the sole is hard. Wear resistance is the lowest among hiking shoes. The uppers of these shoes are made of sheepskin and chemical fiber synthetic materials. The shoe soles are made of plastic materials. The shoes are made of chemical fiber materials with certain permeability, and the uppers are lower. It is suitable for hiking activities with a flat environment, a day or so, and light weight. Even if it is active in the mountains, the terrain environment has a clear and flat path. Because GOTE-TEX fabrics are used in a wide range of applications, even in hiking shoes, in wet weather, wearers are allowed to keep their feet dry and comfortable in a wet environment.
2, hiking shoes Hikingboots
For pure mountain activities of two days or more, and even the mountainous region below the snow line in the active area, some brands of products can even engage in mountain activities in the snow-line region, and even in bad weather, they perform very well. Since it is mainly designed for trekkers of medium distance, there are more mountaineering gear to carry than climbers. These boots have good rigidity and wear resistance, but these boots are basically designed for short to medium distances. The mountain type is not very complicated. Boots of these boots are made of sheepskin or thin leather. The bottom of the boot is made of hard plastic material or Vibram. The boots are made of soft sheepskin or Gore-Tex. The targets are of medium height.
3, reloading Trekking hiking shoes
It is designed for long-distance trekkers, and the active environment area must be a mixture of steep slopes, multiple gravels, and ice, snow and rock. There are more mountaineering equipments to be carried and the number of staying days is longer. It has strong resistance to hard and wear and can better protect the ankles and feet of the feet. This kind of boots is mainly designed for more complex terrain, climbers and heavier equipment, very good flexibility, rigidity and safety, some models can be fitted with crampons. Boots on these boots are made of thick leather and Vibram is used on the sole. And add a certain amount of carbon fiber or steel plate, under the boots using Gore-Tex and other materials, boots higher. It is suitable for long-distance mountain activities. The activity area is above the snow line and it is very good.
4, heavy climbing boots Mountaineering
It is mainly used in high-altitude areas with mixed ice, snow, and cliff topography, and the climate conditions are extremely harsh. It is specially designed for Deng Xue Shan. It has strong resistance to rigidity, can hold crampons, and can effectively protect the safety of the feet. However, these boots are heavier in weight and less flexible. Vibram is used as sole. And lining steel plate, the boot is made of hard plastic resin material, Gore-Tex material is used in the boot, and the boot upper is higher.
5, climbing shoes Climbingskates
Rock shoes are shoes specially designed for rock climbing. They are generally made of light, soft, and sticky rubber - to help rock climbers better use pedals and other technical actions on the rock wall; You can step on tiny feet; with a rubber-wrapped crotch, it's easy for rock climbers to use the heel to make “hook†movements on the rock wall, especially on the negative wall.
The design of a general climbing shoe presses the toe in the direction of the thumb so that the force can be concentrated on the thumb so that a small foot can be stepped on the rock wall. Rock climbers often choose shoes that can tightly wrap their feet in order to be able to work harder on rock walls. Some professional rock climbers even choose a size much smaller than their own. The rock climbing shoes designed for tightly wrapping the foot are different in shape because of the different shapes of the feet of the person, and often one model cannot be adapted to all of the person's feet. So if the size of the climbing shoe is larger than usual shoe size to feel comfortable, this means that the pair of shoes may not be suitable for wearing. Ordinary enthusiasts should follow the standard of letting the toes bend slightly, but without any pain. Wearing too tight shoes can affect your health and performance.
6. Upstream shoes
Due to the large amount of sand and sand in the upstream environment, the environment requires shoes to have strong adhesion instead of excellent grip. In some V-shaped canyons, when walking on the exposed rocky side of the stream, the slope may sometimes exceed 40 to 50 degrees. The shape of the sole is not as deep as that of some hiking shoes. The sole is required to have a large contact area with the rock surface to increase friction. Apart from the design of the shoe sole pattern, such as the sucker type or the wave type, this kind of friction force depends on the performance of the rubber itself. Like the previously mentioned KEENNEWPORTH2, the waterproof grazing knife and carbon rubber outsole are excellent. Just as most climbing shoes do not require special pattern designs on the soles of the shoes, the upstream environment is more complicated. In addition to considering the conditions in the water, it is also necessary to meet the requirements for crossing or limping in the jungle. Therefore, most shoes are designed with patterns. , Used to increase grip performance for complex terrain.
Upstream shoes often come out of water and into the water, which requires the shoe's drainage is better, and the sand can also be discharged with the water, reducing the wear on the footsteps.
There is no fun or excitement in the upstream course. There are waterfalls. A waterfall with a height of more than three meters can be considered as a waterfall. A low waterfall can be climbed through equipment or even a freehand climb. This requires that the upstream shoes have certain Climbing characteristics, in addition to having a good friction effect, the more pointed toe design similar to rock climbing shoes can find a good support point on the wet rock surface, and the hard toe will be very good for protecting the toe. It helps. At this time, patented toe-protected shoes, such as KEEN, can provide adequate protection.
7. Trail running shoes
The classification of cross-country running shoes is actually only gradually developed in China in recent years. In fact, in foreign countries, the history of professional cross-country running shoes will be about 10 years. each
Cross-country running shoes some friends can not distinguish, think that is the general travel shoes, in fact, not the case. Cross-country running shoes have very delicate requirements in terms of technical design, manufacturing process and material selection. Trail running mainly refers to running in the mountains in a manner of running or brisk walking. Because the speed is faster, the impact on the foot is far greater than that of the average walking. Therefore, cross-country running shoes have very complicated requirements in design support and so on.
Trailing shoe soles are generally designed with more than one floor, but some of them are composed of three parts: outsole, cushion, and midsole. The outsole is usually designed with a multiple density pattern in order to cope with different types of grip on different surfaces of the foot. The outsole is not as thick as a hiking shoe because of its weight. Therefore, it is necessary to add a layer of pad to adjust the feeling of the feet in response to the stone pits on the ground. It also provides a certain balance. The elasticity requirement of the midsole is very high, so as to deal with the ankle and knee injuries caused by the huge impact from the ground during the running.
The air permeability of cross-country running shoes is also very critical. It is also the relationship between large amounts of exercise that leads to sufficient ventilation to solve the problem of sweltering. Therefore, cross-country running shoes are widely used breathable mesh fabric. At the same time when choosing waterproof breathable material is also very cautious, so as not to take care of the waterproof and neglect the breathable effect. Cross-country running shoes are usually light weight, and the weight of some cross-country running shoes is the weight of a typical hiking shoe. In addition, the low-cut design is closer to travel shoes and is also suitable for wearing in the city. Therefore, a pair of cross-country running shoes for the general travel or inter-city travel has been fully able to meet your requirements.
Eye Mask
Our company was founded in 2017, Ailian Group is one of the leading manufacturers in cosmetics industry, with a outstanding sales volume in Chinese domestic market, and high speed expanding turnover in oversea market.Integrating product development, product production with product sale, OBO offers customers one stop service, and OEM ODM orders are highly welcome. To meet this requirement, Ailian runs 3 factories, including packing material factory, plastic injection factory and cosmetics factory.
As one of the 3 factories, Guangzhou Alian Cosmetics Co., Ltd covers about 270,000 square meters of land, and has got a staff of about 700 employees in its manufacturing center.
Bringing in advanced research and development technology from both home and abroad, combining with advanced production lines and strict production flow, OBO insists that quality is priority, and has established a complete process of quality control system including raw material testing, first testing, second testing, semi-finished product testing, product stability testing, product security testing as well as product function testing, etc..
During the past years, OBO has developed many brands. Among those, BIOAQUA, VENZEN, ZOZU, One Spring, Images, and ROREC become most famous. OBO`s business range covers makeup product, face care , Body Care , Hair care , oral care product, Hand Care product, Foot Care product, perfume, laundry detergent , soap , and so on......It takes only about 20 minutes drive from Guangzhou Baiyun International Airport to OBO`s cosmetics factory. Welcome to visi !
Eye care, eye mask, eye patch, dark circles repair.Collagen Crystal Eye Mask,eye mask gel,gel beads eye mask,wholesale eye mask
GuangZhou Ailian Cosmetics Co Ltd , https://www.ailianobo.com