[ Chinese wardrobe net ] slowly entered the early autumn, when the season changed, clothes storage became a problem. Nowadays, the cloakroom has entered thousands of households, which greatly facilitates people's daily life. It is not a problem to change clothes in seasons. Let's take a look at the design schemes of the four early autumn cloakrooms.
Early autumn cloakroom design:
The drawers are equipped with open drying racks, and the custom milk-white lockers are noble and warm. The drawers store seasonal clothes and some scattered debris. From the bottom to the top, the storage function is maximized. The clothes in the season are hung in visible places for daily selection and replacement. In addition to the middle part, it can be stored and decorated, and the seat is designed at both ends to further upgrade the function in the details.
Early autumn cloakroom design two:
Mom doesn't have to worry about my clothes and shoes. The white appearance is refreshing, and the layout of the cloakroom is also very neat, and with the clear classification of the owner, the clothes are clear at a glance. Hanging area, upper layer hanging shirts and suits, West once porch pants, set the remaining space to place shoes and boots, while the remaining space on the top is filled into the storage box, you can put a small object such as a hat. From top to bottom, both the order and the convenience of taking it are perfect.
Electroplating is the process of plating a thin layer of Other metals or alloys on some metal surfaces by electrolysis. It is a process of attaching a metal film to the surface of metal or other materials by electrolysis to prevent metal oxidation ( Such as rust), improve wear resistance, electrical conductivity, light reflectivity, corrosion resistance (copper sulfate, etc.) and enhance the appearance of beauty. During electroplating, a plated metal or other insoluble material is used as an anode, and a workpiece to be plated is used as a cathode, and a cation of the plated metal is reduced on the surface of the workpiece to be plated to form a plating layer. In order to eliminate the interference of other cations and make the plating layer uniform and firm, it is necessary to use a solution containing a plating metal cation as a plating solution to keep the concentration of the metal cation of the plating layer unchanged. The purpose of electroplating is to plate a metal coating on the substrate to alter the surface properties or dimensions of the substrate. Electroplating enhances the corrosion resistance of metals (the corrosion-resistant metal is mostly used for plating metals), increases hardness, prevents wear, improves electrical conductivity, smoothness, heat resistance and surface aesthetics.
Electroplating is divided into hanging plating, barrel plating, continuous plating and brush plating, etc., mainly related to the size and batch of the parts to be plated. Hang plating is suitable for general-sized products such as bumpers for automobiles, handlebars for bicycles, etc. Barrel plating is suitable for small parts, fasteners, washers, pins, etc. Continuous plating is suitable for wire and strip production in batches. Brush plating is suitable for partial plating or repair. The electroplating solution is acidic, alkaline and acidic and neutral solution with chrome mixture. Regardless of the plating method, the plating tank and hanging hanger which are in contact with the product to be plated and the plating solution should have a certain degree. Versatility.
Electroplating Materials,Nickel Sulfate,Nickel Sulfate Green Crystal,Cas No.7786-81-4
Jinan Huijinchuan Chemical Industry Co., Ltd. , https://www.hjcchemical.com