Knowing more design content suitable for digital printing can reduce difficulties in printing to avoid errors. Generally, files used for digital printing should be more flexible and simple, without the need for very accurate registration, color matching, or accurate double-sided registration. Contact your digital printing factory a lot and they will give you advice on special designs, images and software settings.
Large format design
There is no need to always limit the design to standard format sizes. Web digital printing presses, such as Agfa's Chromapress, can print larger formats because they use continuous paper tape. You can print posters and flags up to 11.8 meters in length.
Make black richer
When printing black (especially overprinting text), black is usually mixed with a certain proportion of other three colors to make black richer. The rich black prevents the underlying color from revealing. The ratio of the other three colors varies with different printing presses, paper types, background colors, and the overall effect you want. (HOHO Note: Generally do not add 4 colors, mainly add 20% blue, black will be better)
Gradient
To prevent uneven streaks in color mixing or gradients, the gradient is usually controlled to 1 to 4 inches. Use lighter colors, the gradient should not exceed 50%. Using image processing software to add noise to the gradient can also help reduce unevenness.
image
Some printing systems provide a selection of screening technologies that can improve the quality of halftone images. You can ask the operator of the printing plant for samples printed under different screen and color adjustment settings to choose the most suitable setting for you.
High key and dark key
The optimal critical value of the high-key part and the dark-key part varies with different printing machines. Generally speaking, the highlight part cannot be lower than 5% C, 3% M and Y; the dark part cannot be higher than 85% C, 75% M and Y.
Field and gradient
Large areas of solid or flat screens will show streaks on printers that use toner and should be avoided. This is caused by the uneven distribution of charging charge or toner particles. Because thicker paper has poorer affinity for electric charge than thinner paper, the above phenomenon is more severe for thick paper. To avoid this, use a lighter color or shading.
Folded hands
For printing presses that use dry toner, avoid placing the dark part on the paper fold. If the high temperature is not fixed properly, the toner at the paper fold will crack, leaving a tortoise crack. Therefore, if possible, print lighter colors or leave blanks at the creases. In addition, to prevent rough creases, make sure that the folded hands are aligned along the paper texture.
Cutting and binding
You need to know clearly that the printing machine adapts to the size of the paper, leaving as much bleeding and cutting edges as possible, so as to facilitate cutting, especially when it is on a web printing machine or when binding with a sheet, when you use saddle stitch binding to compensate The middle page is squeezed out, and "binding fine adjustment" must be used during imposition to adjust the position of each page of content.
software
When using the path cut function in Adobe Photoshop, the smoothness of general images is 5 or 6. For particularly small images, use the smoothness of 1 or 2 when creating the path, and then set the smoothness to 5 when saving the path.
In addition, 1-bitTiff may have problems when printing, please convert it to grayscale Tiff or bitmapPICT format. In IIIustrator, please convert the text font to a path.
In Quark X Press, avoid rotating the graphics in the graphics frame separately, but rotate the entire graphics frame.
personalize
If you want to change the image or text for personal printing, you must make sure that the replacement element fits in the same position and fits in a variable position. Each page requires at least two proofs containing different substitute elements, so that you can ensure that the different elements are correctly placed in the same position.
Describe:
1) The roll films are suitable for auto-packinhg machines with different film specifications.
2) Wide using range on packing many kinds of products, such as ketchup, honey, chill souce,cosmetic items,paste,biscuits, snackfood,chips, cookies,cakes, bread, coffee,milk powder, chilli peper, candies, hotdogs, fast food and so on.
3) With vivid and sharp printing effect.
4) Per roll be packed with air bubble on pallet or as customer`s requirement.
Flexible Packaging Film show:
Flexible Packaging Film
Bopp Cigarette Fim,Bopp Pearlized Film,Bopp Label Film,Anti Fog Bopp Film
Shijiazhuang dadao Packaging materials Co , https://www.ddplasticfilm.com